Home Page who we are where we are fairs technical assistance work we us
Handling and batching systems
Bulk-bag and octabin systems
Weigh-filling machines
Stapling lines and portable stapling machines
Welding machines for bags
Automatic packaging machines
Liquid batching machines
Strapping systems
Taping machines
Thermoshrink packaging machine
Manipulators and palletizers
Palletwrappers and wrapping machines
Thermoshrinking systems
Our second-hand products



Palletwrappers and wrapping machines
WS 200 I

The most complete palletwrapper with the widest possibility of equipment. Top-level performances. It guarantees speed and reliability to the companies with big volumes of palletized loads or with pallets which are very irregular and unstable.


GIRA WS 200 I mod. automatic machine for palletized loads with extensible film.

  • Maximum pallet size                  1.300 x 1.300 x h. 2.100 mm.
  • Rotating plate with diameter of    1.650 mm.
  • Maximum weight palletized load: 2.000 kg.
  • Button panel integrated in the column with the following functions:
  • Timer for the adjustment of coils in the lower and upper parts of load with differentiated programming
  • Roll-holder truck with adjustable speed through Inverter
  • Adjustable film tensioning with electromagnetic clutch
  • Truck anti-fall device
  • Lower anti-squashing device
  • Automatic photocell to measure the pallet's height
  • Progressive start and stop during the rotating arm phase handled by inverter which enables to adjust also the speed, from 3 to 7.5 revs/minute (according to the new regulations issued by the European Community)
  • Defect diagnostic panel
  • Adjustment of the electromagnetic brake through small digital keyboard
  • Selettore per gruppo pressatore pneumatico
  • Buzzer of cycle start
  • Selection of 4 automatic wrapping programmes:
    single wrapping (only upwards)
    double up/down wrapping
    single wrapping with upper top (anti-rain cycle)
    double up/down wrapping with upper top (anti-rain cycle)
  • Manual and automatic operations
  • Column hinge device for its easy assembling to the platform.
  • Frontal and rear forklift to make handling easier
  • Feed: 400 Volt, 3 Phases + Neutral + Hearth 50 Hz.
  • Construction in conformity with CE regulations



GIRA WS 200 I2P: simplified model with 2 cycles of wrapping and mechanical clutch with quick unlocking lever of the film

GIRA WS 200 S: model with film tensioning through 150-200-250% motorised pre-stretch
- Pre-stretch adjustment directly from the control panel.

GIRA WS 200 S: model with film tensioning through 150-200-250% motorised pre-stretch
- Pre-stretch adjustment directly from the control panel.
- Automatic film cut at the cycle end

WS 200 I


  • Access ramp for transpallet
  • Oversize column for pallets with a height of 2600-3000 mm.
  • Oversize rotating plank with a diameter of 1800 mm.
  • Pneumatic pressing device for unstable loads
  • Pressing device extension
  • Pallet-wrapping rising frame to use on three sides with floor-stand trucks
  • Underground frame flush to the floor
  • Black loads' reading photocell
  • Pallet weighing system





PAGANI IMBALLAGGI Via Morandi, 32 - 21047 Saronno (VA) Tel. +39.02.96701343 r.a. Fax +39.02.96701377 - PRIVACY